●The TPS65920 and TPS65930 devices are power-management ICs for OMAP and other mobile applications. The devices include power-management, a universal serial bus (USB) high-speed (HS) transceiver, light-emitting diode (LED) drivers, an analog-to-digital converter (ADC), a real-time clock (RTC), and an embedded power control (EPC). In addition, the TPS65930 includes a full audio codec with two digital-to-analog converters (DACs) and two ADCs to implement dual voice channels, and a stereo downlink channel that can play all standard audio sample rates through a multiple format inter-integrated sound (I2S)/time division multiplexing (TDM) interface.
●These optimized devices supports the power and peripheral requirements of the OMAP application processors. The power portion of the devices contains three buck converters, two controllable by a dedicated SmartReflex class-3 interface, multiple low dropout (LDO) regulators, an EPC to manage the power sequencing requirements of OMAP, and an RTC and backup module. The RTC can be powered by a backup battery when the main supply is not present, and the devices include a coin-cell charger to recharge the backup battery as needed.
●The USB module provides a HS 2.0 OTG transceiver suitable for direct connection to the OMAP UTMI+ low pin interface (ULPI), with an integrated charge pump and full support for the carkit CEA-936A specification. An ADC is provided for monitoring signals, such as supply voltage, entering the device, and two additional an external ADC inputs are input is provided for system use.
●The devices provide driver circuitry to power two LED circuits that can illuminate a panel or provide user indicators. The drivers also provide pulse width modulation (PWM) circuits to control the illumination levels of the LEDs. A keypad interface implements a built-in scanning algorithm to decode hardware-based key presses and reduce software use, with multiple additional general-purpose input/output devices (GPIOs) that can be used as interrupts when configured as inputs.
● Power:
● Three Efficient Step-down Converters
● Four External Linear LDOs for Clocks and Peripherals
● SmartReflex Dynamic Voltage Management
● Audio (TPS65930 Device Only):
● Differential Input Main Microphones
● Mono Auxiliary/FM Input
● External Predrivers for Class D (Stereo)
● TDM Interface
● Automatic Level Control (ALC)
● Digital and Analog Mixing
● 16-Bit Linear Audio Stereo DAC (96, 48, 44.1, and 32 kHz and Derivatives)
● 16-Bit Linear Audio Stereo ADC (48, 44.1, and 32 kHz and Derivatives)
● Carkit
● USB:
● USB 2.0 On-the-Go (OTG)-Compliant HS Transceivers
● 12-Bit Universal Transceiver Macro Interface ULPI
● USB Power Supply (5-V Charge Pump for VBUS)
● Consumer Electronics Association (CEA)-2011: OTG Transceiver Interface Specification
● CEA-936A: Mini-USB Analog Carkit Specification
● Additional Features:
● LED Driver Circuit for Two External LEDs
● Two External 10-Bit MADC Inputs
● Real-Time Clock (RTC) and Retention Modules
● HS I2C Serial Control
● Thermal Shutdown and Hot-Die Detection
● Keypad Interface (up to 6 × 6)
● External Vibrator Control
● 15 GPIOs
● 0.65-mm Pitch, 139-Pin, 10-mm × 10-mm Package
● Charger:
● Backup Battery Charger
● APPLICATIONS
● Smart Phones
● Tablets
● Industrial
● Handheld Systems
●SmartReflex Is a trademark of Texas Instruments OMAP Is a trademark of Texas Instruments
