●The TPS6020x step-up, regulated charge pumps generate a 3.3-V ±4% output voltage from a 1.8-V to 3.6-V input voltage. The devices are typically powered by two Alkaline, NiCd or NiMH battery cells and operate down to a minimum supply voltage of 1.6 V. Continuous output current is a minimum of 100 mA for the TPS60200 and TPS60201 and 50 mA for the TPS60202 and TPS60203, all from a 2-V input. Only four external capacitors are needed to build a complete low-ripple DC/DC converter. The push-pull operating mode of two single-ended charge pumps assures the low output voltage ripple as current is continuously transferred to the output.
● Regulated 3.3-V Output Voltage With up to
●100-mA Output Current From a 1.8-V to 3.6-V
●Input Voltage
● Less Than 5-mV (PP) Output Voltage
●Ripple Achieved With Push-Pull Topology
● Integrated Low-Battery and Power-Good Detector
● Switching Frequency Can Be Synchronized to
●External Clock Signal
● Extends Battery Usage With up to 90% Efficiency
●and 35-µA Quiescent Supply Current
● Reliable System Shutdown Because Output
●Capacitor Is Discharged When Device Is Disabled
● Easy-to-Design, Low-Cost, Low-EMI Power
●Supply Since No Inductors Are Used
● 0.05-µA Shutdown Current, Battery Is Isolated
●From Load in Shutdown Mode
● Compact Converter Solution in UltraSmall 10-pin
●MSOP With Only Four External Capacitors
●Required
● Evaluation Module Available (TPS60200EVM-145)
