●TPS54678 device is a full-featured 6-V, 6-A, synchronous step-down current mode converter with two integrated MOSFETs.
●TPS54678 enables small designs by integrating the MOSFETs, implementing current mode control to reduce external component count, reducing inductor size by enabling up to 2-MHz switching frequency, and minimizing the IC footprint with a small 3-mm × 3-mm thermally enhanced WQFN package.
●TPS54678 provides accurate regulation for a variety of loads with an accurate ±1% voltage reference (VREF) over temperature.
●Efficiency is maximized through the integrated 12-mΩ MOSFETs. Using the enable pin, shutdown supply current is reduced by disabling the device.
●The output voltage start-up ramp is controlled by the soft-start pin that can also be configured for sequencing or tracking. Monotonic start-up is achieved with prebiased voltage. Undervoltage lockout can be increased by programming the threshold with a resistor divider on the enable pin. An open-drain power good signal indicates the output is within 93% to 105% of its nominal voltage.
●Cycle-by-cycle current limit, hiccup overcurrent protection and thermal shutdown protect the device during an overcurrent condition.
● Two 12-mΩ (Typical) MOSFETs for High-
●Efficiency 6-A Continuous Output Current
● 200-kHz to 2-MHz Switching Frequency
● 0.6-V ±1% Voltage Reference Over Temperature
●(40°C to 150°C)
● Synchronizes to External Clock
● Start-Up With Prebiased Voltage
● Power Good Output
● Adjustable Slow Start and Sequencing
● Cycle-by-Cycle Current Limit and Hiccup Current
●Protection
● Adjustable Input Voltage UVLO
● Thermally Enhanced 16-Pin 3-mm × 3-mm WQFN
●(RTE)
