TPS2393A Datasheet PDF - TI

●The TPS2393A integrated circuit is a hot swap power manager optimized for use in nominal –48-V systems. It operates with supply voltage ranges from –20-V to –80-V, and is rated to withstand spikes to –100 V. In conjunction with an external N-channel FET and sense resistor, it can be used to enable live insertion of plug-in cards and modules in powered systems. It provides load current slew rate control and peak magnitude limiting. Undervoltage and overvoltage shutdown thresholds are easily programmed via a three-resistor divider network. In addition, two active-low, debounced inputs provide plug-in insertion and removal detection. The associated debounce delay applies to both actions. A power good (PG)\ output enables downstream converters. The TPS2393A also provides the basic hot swap functions of electrical isolation of faulty cards, filtered protection against nuisance overcurrent trips, and single-line fault reporting.

●The TPS2393A periodically retries the load in the event of a fault.

● Wide Input Supply Range: –20 V to –80 V

● Transient Rating to –100 V

● Insertion/Removal Detection Delay

● Extended Debounce Delay

● Programmable Current Limit

● Programmable Current Slew Rate

● Programmable UV/OV Thresholds/Hysteresis

● Open-Drain Power Good (PG)\ Output

● Fault Timer to Eliminate Nuisance Trips

● Open-Drain Fault Output (FAULT)\

● 14-Pin TSSOP package

● APPLICATIONS

● –48-V Distributed Power Systems

● Central Office Switching

● Wireless Base Station