TPA3007D1 Datasheet PDF - TI

●The TPA3007D1 is a 6.5-W mono bridge-tied load (BTL) class-Daudio power amplifier with high efficiency, eliminating the need for heat sinks. The TPA3007D1 can drive 8- speakers with only a ferrite bead filter required to reduce EMI.

●The gain of the amplifier is controlled by two input terminals, GAIN1 and GAIN0. This allows the amplifier to be configured for a gain of 12, 18, 23.6, and 36 dB. The differential input stage provides high common mode rejection and improved power supply rejection.

●The amplifier also includes "de-pop" circuitry to reduce the amount of pop at power-up and when cycling SHUTDOWN.

●The TPA3007D1 is available in the 24-pin TSSOP package (PW) and does not require an external heat sink.

● 6.5 W Into 8- toVCC, Short to GND, Short Between Outputs)

● Third-Generation Modulation Technique:

● Replaces Large LC Filter With Small, Low-Cost Ferrite Bead Filter in Most Applications

● Improved Efficiency

● Improved SNR

● Low Supply Current... mA Typ at 12 V

● Shutdown Control... < 1µA Typ

● APPLICATIONS

● LCD Monitors/TVs

● Desktop Replacement Notebook PCs

● Hands-Free Car Kits

● Powered Speakers