TDA8566Q/N2/S438,1 Datasheet PDF - NXP

●General description

●The TDA8566 is an integrated class-B output amplifier which is available in several packages. TDA8566TH is contained in a 20-lead small outline plastic package. The TDA8566TH1 is a 24-lead small outline plastic package which is pin compatible with the I2C-bus controlled amplifier TDA1566TH for one board layout. TDA8566Q is a 17-pin DIL-bent-SIL package.

●The device contains 2 amplifiers in a Bridge-Tied Load (BTL) configuration. The output power is 2×25 W in a 4Ωload or 2 ×40 W in a 2Ωload. It has a differential input stage and 2 diagnostic outputs. The device is primarily developed for car radio applications.

●Features

●Differential inputs

●Very high Common Mode Rejection Ratio (CMRR)

●High common mode input signal handling

●Requires very few external components

●High output power

●4Ωand 2Ωload driving capability

●Low offset voltage at output

●Fixed gain

●Diagnostic facility (distortion, short-circuit and temperature pre-warning)

●Good ripple rejection

●Mode select switch (operating, mute and standby)

●Load dump protection

●Short-circuit proof to ground, to VPand across the load

●Low power dissipation in any short-circuit condition

●Thermally protected

●Reverse polarity safe

●Protected against electrostatic discharge

●No switch-on/switch-off plops

●Low thermal resistance

●TDA8566TH1 is pin compatible with TDA1566TH