●The TAS5132 is an integrated stereo digital amplifier power stage with an advanced protection system. The TAS5132 is capable of driving a 6- bridge-tied load (BTL) at up to 25 W per channel with low integrated noise at the output, low THD+N performance, and low idle power dissipation.
●A low-cost, high-fidelity audio system can be built using a TI chipset, comprising a modulator (e.g., TAS5086) and the TAS5132. This system only requires a simple passive LC demodulation filter to deliver high-quality, high-efficiency audio amplification with proven EMI compliance. This device requires two power supplies, at 12 V for GVDD and VDD, and at 18 V for PVDD. The TAS5132 does not require power-up sequencing due to internal power-on reset. The efficiency of this digital amplifier is greater than 90% into 8 , which enables the use of smaller power supplies and heatsinks.
●The TAS5132 has an innovative protection system integrated on chip, safeguarding the device against a wide range of fault conditions that could damage the system. These safeguards are short-circuit protection, overcurrent protection, undervoltage protection, and overtemperature protection. The TAS5132 has a new proprietary current-limiting circuit that reduces the possibility of device shutdown during high-level music transients.
● 2×20 W at 10% THD+N Into 8- BTL
● >100-dB SNR (A-Weighted)
● <0.1% THD+N at 1 W
● Thermally Enhanced Package:
● DDV (44-pin HTSSOP)
● High-Efficiency Power Stage (>90%) With 140-m Output MOSFETs
● Power-On Reset for Protection on Power Up Without Any Power-Supply Sequencing
● Integrated Self-Protection Circuits Including Undervoltage, Overtemperature, Overload, Short Circuit
● PWM Activity Detector to detect stopped PWM inputs and protect the system
● Error Reporting
● EMI Compliant When Used With Recommended System Design
● Intelligent Gate Drive
● Pin Compatible With the TAS5142DDV
● APPLICATIONS
● Televisions
● Mini/Micro Audio Systems
● DVD Receivers
● Home Theaters
●All other trademarks are the property of their respective owners
Part 3D Model
