●The SST26VF032B-104I/MF is a 32MB serial quad I/O (SQI) Flash Memory features a 6-wire, 4-bit I/O interface that allows for low-power, high-performance operation. It also supports full command-set compatibility to traditional serial peripheral interface (SPI) protocol. System designs using SQI flash devices occupy less board space. It is manufactured with proprietary, high-performance CMOS SuperFlash® technology. The split-gate cell design and thick-oxide tunneling injector attain better reliability and manufacturability compared with alternate approaches. It is significantly improves performance and reliability, while lowering power consumption. This device writes with a single power supply of 2.7 to 3.6V. Since for any given voltage range, the SuperFlash technology uses less current to program and has a shorter erase time, the total energy consumed during any erase or program operation is less than alternative flash memory technologies.
● Serial interface architecture - mode 0/3
● Nibble-wide multiplexed I/O with SPI-like serial command structure
● High speed clock frequency - 104MHz maximum
● Burst modes - continuous linear burst
● Superior reliability
● Endurance - 100000 cycles minimum
● Greater than 100 years data retention
● Low power consumption
● Fast erase time
● End-of-write detection - software polling the BUSY bit in status register
● Flexible erase capability
● Write-suspend - suspend program or erase operation to access another block/sector
● Software reset (RST) mode
● Software write protection
● Individual-block write protection with permanent lock-down capability
● Read protection on top and bottom 8-Kbyte parameter blocks
● Security ID
● User-programmable area
