SN65HVD33-EP Datasheet PDF - TI

●The SN65HVD3x-EP devices are 3-state differential line drivers and differential-input line receivers that operate with 3-V power supply.

●Each driver and receiver has separate input and output pins for full-duplex bus communication designs. They are designed for balanced transmission lines and interoperation with ANSI TIA/EIA-485A, TIA/EIA-422-B, ITU-T v.11, and ISO 8482:1993 standard-compliant devices.

●The SN65HVD30, SN65HVD31, and SN65HVD32 are fully enabled with no external enabling pins.

●The SN65HVD33, SN65HVD34, and SN65HVD35 have active-high driver enables and active-low receiver enables. A low (less than 1 µA) standby current can be achieved by disabling both the driver and receiver.

●All devices are characterized for operation from –55°C to 125°C.

● 1/8 Unit-Load Option Available (up to 256 Nodes

●on the Bus)

● Bus-Pin ESD Protection Exceeds 15 kV HBM

● Optional Driver Output Transition Times for

●Signaling Rates(1) of 1 Mbps, 5 Mbps, and

●25 Mbps

● Low-Current Standby Mode: <1 µA

● Glitch-Free Power-Up and Power-Down Protection

●for Hot-Plugging Applications

● 5-V Tolerant Inputs

● Bus Idle, Open, and Short-Circuit Fail Safe

● Driver Current Limiting and Thermal Shutdown

● Meet or Exceed the Requirements of ANSI

●TIA/EIA-485-A and RS-422 Compatible