●description
●The SMJ320F240 is a member of a family of digital signal processor (DSP) controllers based on the TMS320C2xx generation of 16-bit fixed-point DSPs. This family is optimized for digital motor/motion control applications and contains 16K words of flash memory on chip. The DSP controller combines the enhanced TMS320 architectural design of the C2xLP core CPU for low-cost, high-performance processing capabilities and several advanced peripherals optimized for motor/motion control applications. These peripherals include the event manager module, which provides general-purpose timers and compare registers to generate up to 12 PWM outputs, and a dual 10-bit analog-to-digital converter (ADC), which can perform two simultaneous conversions within 6.1 μs.
●• Processed to MIL-PRF-38535 (QML)
●• High-Performance Static CMOS Technology
●• Includes the T320C2xLP Core CPU
● - Object Compatible With the TMS320C2xx Family
● - Source Code Compatible With SMJ320C25
● - Upwardly Compatible With SMJ320C50
● - 50-ns Instruction Cycle Time D Memory
● - 544 Words × 16 Bits of On-Chip Data/Program Dual-Access RAM
● - 16K Words × 16 Bits of On-Chip Program Flash EEPROM
● - 224K Words × 16 Bits of Total Memory Address Reach (64K Data, 64K Program and 64K I/O, and 32K Global Memory Space)
●• Event-Manager Module
● - 12 Compare/Pulse-Width Modulation (PWM) Channels
● - Three 16-Bit General-Purpose Timers With Six Modes, Including Continuous Upand Up/Down Counting
● - Three 16-Bit Full-Compare Units With Deadband
● - Three 16-Bit Simple-Compare Units
● - Four Capture Units (Two With Quadrature Encoder-Pulse Interface Capability)
●• Dual 10-Bit Analog-to-Digital Conversion Module
●• 28 Individually Programmable, Multiplexed I/O Pins
●• Phase-Locked-Loop (PLL)-Based Clock Module
●• Watchdog Timer Module (With Real-Time Interrupt)
●• Serial Communications Interface (SCI) Module
●• Serial Peripheral Interface (SPI) Module
●• Six External Interrupts (Power Drive Protect, Reset, NMI, and Three Maskable Interrupts)
●• Four Power-Down Modes for Low-Power Operation
●• Scan-Based Emulation
●• Development Tools Available:
● - Texas Instruments (TI™) ANSI C Compiler, Assembler/Linker, and C-Source Debugger
● - Scan-Based Self-Emulation (XDS510™)
● - Third-Party Digital Motor Control and Fuzzy-Logic Development Support
●• -55°C to 125°C Operating Temperature Range, QML Processing
●• 132-Pin Ceramic Quad Flat Package (HFP Suffix)
