PTH03000W Datasheet PDF - TI

●The PTH03000 series of non-isolated power modules are small in size and high on performance. Using double-sided surface mount construction and synchronous rectification technology, these regulators deliver up to 6 A of output current while occupying a PCB area of about half the size of a standard postage stamp. They are an ideal choice for applications where space, performance and cost are important design constraints.

●This series operates from an input voltage of 3.3-V to provide step-down power conversion to any output voltage over the range, 0.9 V to 2.5 V. The output voltage of the PTH03000W is set within this range using a single resistor.

●Operating features include an on/off inhibit, output voltage adjust (trim), an output current limit, and over-temperature protection.

●Target applications include telecom, industrial, and general purpose circuits, including low-power dual-voltage systems that use a DSP, microprocessor, or ASIC.

●Package options include both through-hole and surface mount configurations.

● Up to 6-A Output Current

● 3.3 V Input Voltage

● Wide-Output Voltage Adjust (0.9 V to 2.5 V)

● Efficiencies up to 95%

● 115 W/in³ Power Density

● On/Off Inhibit

● Under-Voltage Lockout

● Output Current Limit

● Over-Temperature Protection

● Operating Temp: –40 to +85°C

● Surface Mount Package

● Safety Agency Approvals (Pending): UL 1950, CSA 22.2 950, EN60950 & VDE