OPA2835ID Datasheet PDF - TI

●The OPA2835ID is a dual ultra-low power voltage feed-back Operational Amplifier with rail-to-rail output and negative rail input. Consuming only 250µA per channel and an unity gain bandwidth of 56MHz, this amplifier set an industry-leading performance-to-power ratio for rail-to-rail amplifier. For battery-powered portable applications where power is of key importance, the low power consumption and high-frequency performance of the OPA2835 device offers performance versus power that is not attainable in other devices. Coupled with a power-savings mode to reduce current to <1.5µA, the device offers an attractive solution for high-frequency amplifiers in battery-powered applications.

● 0.5µA Typical power down mode

● 10ns (2VSTEP) Rise time

● 55ns (2VSTEP) Settling time (0.1%)

● 200ns Overdrive recovery time

● 0.00015% (-116.4dBc) at 1kHz (1VRMS) SNR

● 0.00003% (-130dBc) at 1kHz (1VRMS) THD

● -70/-73dBc at 1MHz (2VPP) HD2/HD3

● 9.3nV/√Hz (f=100kHz) Input voltage noise

● 100µV (±500µV maximum) Input offset voltage

● 113dB CMRR

● 40mA Output current drive

● Green product and no Sb/Br