NX3L1G66GM,115 Datasheet PDF - NXP

●Overview

●The NX3L1G66 provides one single pole single-throw analog switch function. It has two input/output terminals (Yand Z) and an active HIGH enable input pin (E). When E is LOW, the analog switch is turned off.

●Schmitt trigger action at the enable input (E) makes the circuit tolerant to slower input rise and fall times across the entire VCC range from 1.4 V to 4.3 V.

●The NX3L1G66 allows signals with amplitude up to VCC to be transmitted from Y to Z; or from Z to Y. Its low ON resistance (0.5 Ω) and flatness (0.13 Ω) ensures minimal attenuation and distortion of transmitted signals.

●MoreLess

●## Features

● Wide supply voltage range from 1.4 V to 4.3 V

● Very low ON resistance (peak):

● 1.6 Ω (typical) at VCC = 1.4 V

● 1.0 Ω (typical) at VCC = 1.65 V

● 0.55 Ω (typical) at VCC = 2.3 V

● 0.50 Ω (typical) at VCC = 2.7 V

● 0.50 Ω (typical) at VCC = 4.3 V

● High noise immunity

● ESD protection:

● HBM JESD22-A114E Class 3A exceeds 7500 V

● MM JESD22-A115-A exceeds 200 V

● CDM AEC-Q100-011 revision B exceeds 1000 V

● CMOS low-power consumption

● Latch-up performance exceeds 100 mA per JESD 78 Class II Level A

● Direct interface with TTL levels at 3.0 V

● Control input accepts voltages above supply voltage

● High current handling capability (350 mA continuous current under 3.3 V supply)

● Specified from -40 Cel to +85 Cel and from -40 Cel to +125 Cel

●## Target Applications

● Cell phone

● PDA

● Portable media player

●## Features