●Overview
●The NX3L1G3157 is a low-ohmic single-pole double-throw analog switch suitable for use as an analog or digital 2:1 multiplexer/demultiplexer. It has a digital select input (S), two independent inputs/outputs (Y0 and Y1) and a common input/output (Z). Schmitt trigger action at the digital input makes the circuit tolerant to slower input rise and fall times.
●The NX3L1G3157 allows signals with amplitude up to VCC to be transmitted from Z to Y0 or Y1; or from Y0 or Y1 to Z. Its low ON resistance (0.5 Ω) and flatness (0.13 Ω) ensures minimal attenuation and distortion of transmitted signals.
●MoreLess
●## Features
● Wide supply voltage range from 1.4 V to 4.3 V
● Very low ON resistance:
● 1.6 Ω (typical) at VCC = 1.4 V
● 1.0 Ω (typical) at VCC = 1.65 V
● 0.55 Ω (typical) at VCC = 2.3 V
● 0.50 Ω (typical) at VCC = 2.7 V
● 0.50 Ω (typical) at VCC = 4.3 V
● Break-before-make switching
● High noise immunity
● ESD protection:
● HBM JESD22-A114F Class 3A exceeds 7500 V
● MM JESD22-A115-A exceeds 200 V
● CDM AEC-Q100-011 revision B exceeds 1000 V
● IEC61000-4-2 contact discharge exceeds 8000 V for switch ports
● CMOS low-power consumption
● Latch-up performance exceeds 100 mA per JESD78 Class II Level A
● Direct interface with TTL levels at 3.0 V
● Control input accepts voltages above supply voltage
● High current handling capability (350 mA continuous current under 3.3 V supply)
● Specified from -40 °C to +85 °C and from -40 °C to +125 °C
●## Target Applications
● Cell phone
● PDA
● Portable media player
●## Features
