●Overview
●The NTS0102 is a 2-bit, dual supply translating transceiver with auto direction sensing, that enables bidirectional voltage level translation. It features two 2-bit input-output ports (An and Bn), one output enable input (OE) and two supply pins (VCC(A) and VCC(B)). VCC(A) can be supplied at any voltage between 1.65 V and 3.6 V and VCC(B) can be supplied at any voltage between 2.3 V and 5.5 V, making the device suitable for translating between any of the voltage nodes (1.8 V, 2.5 V, 3.3 V and 5.0 V). Pins An and OE are referenced to VCC(A) and pins Bn are referenced to VCC(B). A LOW level at pin OE causes the outputs to assume a high-impedance OFF-state. This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down.
●MoreLess
●## Features
● Wide supply voltage range:
● VCC(A): 1.65 V to 3.6 V and VCC(B): 2.3 V to 5.5 V
● Maximum data rates:
● Push-pull: 50 Mbps
● IOFF circuitry provides partial Power-down mode operation
● Inputs accept voltages up to 5.5 V
● ESD protection:
● HBM JESD22-A114E Class 2 exceeds 2500 V for A port
● HBM JESD22-A114E Class 3B exceeds 8000 V for B port
● MM JESD22-A115-A exceeds 200 V
● CDM JESD22-C101E exceeds 1500 V
● Latch-up performance exceeds 100 mA per JESD 78B Class II
● Multiple package options
● Specified from -40 °C to +85 °C and -40 °C to +125 °C
●## Target Applications
● I²C/SMBus
● UART
● GPIO
●## Features
