NCV7703CD2R2G Datasheet PDF - ON Semiconductor

●The NCV7703C is a fully protected Triple Half−Bridge Driver designed specifically for automotive and industrial motion control applications. The three half−bridge drivers have independent control. This allows for high side, low side, and H−Bridge control. H−Bridge control provides forward, reverse, brake, and high impedance states (with EN = 0). The drivers are controlled via a standard Serial Peripheral Interface (SPI).

●Features |   | Benefits

●---|---|---

● | |  | |  |

● Ultra Low Quiescent Current in Sleep Mode

●|   |

● Low battery drain when automobile is off

● 3 High-Side and 3 Low-Side Drivers Connected as Half-Bridges

●|   |

● Ideal for x-y automotive mirror control

● Internal Free-Wheeling Diodes

●|   |

● Limits inductive voltage spikes

● Configurable as H-Bridge Drivers

●|   |

● Can drive motors in both directions.

● SPI Control

●|   |

● Microprocessor controlled.

● Daisy Chain Capable

●|   |

● Ability to add additional loads via the same microprocessor channel

● Compliance with 5V and 3.3V Systems

●|   |

● Works with a variety of microprocessor logic thresholds

● Overvoltage and Undervoltage Lockout

●|   |

● Defines operation in a predictable voltage range

● Fault Reporting

●|   |

● Reports system faults back to the microprocessor

● Shoot-Through Attempt Detection

●|   |

● Eliminates shoot through programming