●The MKL25Z128VLK4 is an ultra-low-power Microcontroller, adds a full-speed USB 2.0 On-the-Go (OTG) controller or a full-speed crystal-less USB 2.0 device controller in addition to the Kinetis KL1x series. The Kinetis KL2x microcontroller family is compatible with Kinetis K20 MCUs (based on ARM® Cortex®-M4) and with all other Kinetis KL1x, KL2x, KL3x and KL4x series microcontrollers, providing a migration path to lower and higher performance and feature integration.
● Ultra-low-power Consumption
● Next-generation 32-bit ARM Cortex-M0+ Core - 2x More CoreMark/mA than Closest 8/16-bit Architecture
● Single-cycle fast I/O access port facilitates bit banging and software protocol emulation
● Compute Clocking option reduces dynamic power by placing peripherals in an Asynchronous stop mode
● LPUART, SPI, I²C, FlexIO, ADC, DAC, LP timer & DMA support LP mode operation without waking up core
● Up to 256kb Flash with 64-byte Flash Cache, up to 32kb RAM
● Security Circuitry to Prevent Unauthorized Access to RAM and Flash Contents
● 16kb ROM and Built-in boot loader simplifies effort to program MCU and allows easy flash upgrades
● ARM Cortex-M0+ core, 48MHz Core Frequency Over Full Voltage and Temperature Range (-40 to +105°C)
● Bit Manipulation Engine for Improved Bit Handling of Peripheral Modules
● Thumb Instruction Set Combines High Code Density with 32-bit Performance
● 4-channel DMA for peripheral & memory servicing with reduced CPU loading & faster system throughput
● Independent-clocked COP Guards Against Clock Skew or Code Runaway for Fail-safe Applications
● Up to 16-bit ADC with Configurable Resolution, Sample Time and Conversion Speed/Power
● Integrated Temperature Sensor
● High-speed Comparator with Internal 6-bit DAC
● 12-bit DAC with DMA Support
● Two 6-channel and One 2-channel 16-bit Low-power Timer PWM Modules with DMA Support
● 2-channel 32-bit Periodic Interrupt Timer provide time base for RTOS task schedule or Trigger Source
● Low-power Timer Allows Operation in All Power Modes Except for VLLS0