MC9S08QD4CPC Datasheet PDF - NXP

●The MC9S08QD4CPC is a 8-bit Microcontroller based on enhanced HCS08 CPU (8MHz bus) with CISC architecture operates at a maximum frequency of 16MHz. The device incorporates 4kB internal flash, 0.256kB internal RAM, 4-channel 10-bit A/D converter and 6 general-purpose I/O pins. This device also features like low voltage detect, internal clock generator and PWM/input capture/output compare timers. Internal clock source module (ICS) containing a frequency-locked-loop (FLL) controlled by internal reference. Precision trimming of internal reference allows 0.2% resolution and 2% deviation over temperature and voltage. Watchdog computer operating properly (COP) reset with option to run from dedicated 32kHz internal clock source.

● HC08 Instruction set with added BGND instruction

● Background debugging system

● Breakpoint capability to allow single breakpoint setting during in-circuit debugging

● Support for up to 32 Interrupt/reset sources

● Power-saving modes - Wait plus three stops

● Internal clock source module (ICS) - Containing a frequency-locked-loop (FLL)

● Low-voltage detection with reset or interrupt

● Illegal opcode detection with reset

● Illegal address detection with reset

● 4-pin Keyboard interrupt module

● Software selectable pull-ups on ports when used as input

● Software selectable slew rate control and drive strength on ports when used as output

● Internal pull-up on RESET and IRQ pin to reduce customer system cost