MAX354EWE+T Datasheet PDF - Maxim Integrated

●The MAX354EWE+T is a single 8-channel fault-protected analogue multiplexer in 16 pin WSOIC package. This fault-protected multiplexer use a series NPN structure (Field effect transistor) that protects the devices from overvoltage up to 40V beyond the supply rails during power-up, power down and fault conditions. The MAX354 also protect sensitive circuit components against voltages near or beyond the normal supplies. The mux has 350 ohm on-resistance and can be used for demultiplexing as well as multiplexing. Input leakage current is less than 0.5nA at +25°C and less than 5nA at +85°C. All digital inputs have 0.8V and 2.4V logic thresholds ensuring both TTL and CMOS logic compatibility without pull-up resistors. It features break-before-make operation and has power consumption less than 1.5mW. Typical applications include data acquisition systems, ATE equipment, signal routing and redundant/backup systems.

● Supply voltage range is 4.5V to 36V, ±4.5V to ±18V

● Operating temperature range from -40°C to 85°C

● On switch turns off with overvoltage

● All switches Off with supplies Off

● Output clamps at 1.5V below supply rails

● No power up sequencing required

● On-resistance matching between channels is 7ohm

● NO-off leakage current is 0.01nA at 25°C

● COM-off leakage current and COM-on leakage current is 0.02nA at 25°C

● Charge injection is 80pC and transition time is 180ns at 25°C