MAX1927REUB+ Datasheet PDF - Maxim Integrated

●The MAX1927REUB+ is a low output voltage, PWM step-down DC to DC converter in 10 pin µMAX package. This step-down converter powers low voltage microprocessors in compact equipment requiring highest possible efficiency. The MAX1927 is optimized for generating low output voltages (down to 750mV) at high efficiency using small external components. The supply voltage range is from 2.6V to 5.5V and provides minimum output current is 800mA. A unique control scheme minimizes ripple at light loads while maintaining low 140µA quiescent current. It includes a low on-resistance internal MOSFET switch and synchronous rectifier to maximize efficiency and minimize external component count. The 100% duty cycle operation allows for dropout voltage of only 340mV at 800mA. It also includes internal soft start, power-OK (POK) output and selectable forced PWM operation for lower noise at all load currents. The MAX1927R is used in DSP core power and battery powered equipment.

● Adjustable output range down to 0.75V

● Operating temperature range from -40°C to 85°C

● POK threshold of 0.675V

● FB voltage accuracy of 0.75V and FB input current of 10nA

● No schottky diode required

● Selectable forced PWM operation

● 1MHz PWM switching frequency allows for small external components

● Maximum duty cycle of 100% at TA = 0°C to 85°C

● Quiescent current of 140µA (no load) and 2mA (1MHz switching)

● Quiescent current in dropout of 190µA and shutdown supply current of 0.1µA at TA = 0°C to 85°C