LT8613EUDE#PBF Datasheet PDF - Linear Technology

●The LT8613EUDE#PBF is a compact high-efficiency high-speed synchronous monolithic step-down Switching Regulator consumes only 3µA of quiescent current. Top and bottom power switches are included with all necessary circuitry to minimize the need for external components. The built-in current sense amplifier with monitor and control pins allows accurate input or output current regulation and limiting. Low ripple Burst Mode® operation enables high efficiency down to very low output current while keeping the output ripple below 10mVP-P. A SYNC pin allows synchronization to an external clock. Internal compensation with peak current mode topology allows the use of small inductors and results in fast transient response and good loop stability. The EN/UV pin has an accurate 1V threshold and can be used to program VIN undervoltage lockout or to shut down the LT8613 reducing the input supply current to 1µA. A capacitor on the TR/SS pin programs the output voltage ramp rate during startup.

● Rail-to-rail current sense amplifier with monitor

● Allows use of small inductors

● Low EMI

● Current-mode operation

● Internal compensation

● Output soft-start and tracking

● Accurate 1V enable pin threshold

● 40ns Fast minimum switch-ON time

● 250mV at 3A Low dropout under all conditions