HJ16148HLP Datasheet PDF - Hammond Manufacturing

●Application

● Designed for use as instrument enclosures, electric, hydraulic or pneu--matic control housings, electrical junction boxes or terminal wiring enclosures.

● Provides protection where equipment may be hosed down or otherwise be very wet, or in outdoor applications for full weather protection.

●Standards

● UL 508 Type 3R, 4, 12 and 13

● CSA Type 3R, 4, 12 and 13

●Complies with:

● NEMA Type 3R, 4, 12 and 13

● JIC EGP-1-1967 unless marked

● IEC 60529, IP66

●Construction

● Body formed from 16 or 14 gauge steel. Covers are formed from 14 gauge steel.

● Smooth, continuously welded seams Without Knock-Outs, cutouts or holes.

● Welded brackets provide for enclosure mounting.

● Continuous hinged cover is secured with stainless steel clamps and screws.

● Stainless steel continuous hinge on door may be removed by pulling the stainless steel hinge pin.

● Seamless poured-in place gasket.

● Internal threaded weld studs are provided for mounting inner panels.

● A bonding stud is provided on the door and a grounding stud is provided in the enclosure.

●Finish

● Cover and enclosure are phos-phatized, finished in recoatable smooth ANSI 61 gray powder coating.