HCNW4503 Datasheet PDF - AVAGO Technologies

●Description

●These diode-transistor opto coup lers use an insulating layer between a LED and an integrated photodetector to provide elec trical in su lation between input and out put. Separate connections for the photodiode bias and out put-transistor collector increase the speed up to a hun dred times that of a conven tional phototransistor coupler by reduc ing the base-collector capacitance.

●Features

●• 15 kV/µs minimum common mode transient immunity at VCM = 1500 V

●• High speed: 1 Mb/s

●• TTL compatible

●• Available in 8-Pin DIP, SO-8, widebody packages

●• Open collector output

●• Guaranteed performance from temperature: 0°C to 70°C

●• Safety approval

●UL Recognized – 3750 Vrms for 1 minute (5000 Vrms for 1 minute for HCNW and Option 020 devices) per UL1577 CSA Approved

●IEC/EN/DIN EN 60747-5-5 Approved

●   – VIORM = 630 V peak for HCPL-4503#060

●   – VIORM = 1414 V peak for HCNW devices

●• Dual channel version available (4534/0534)

●• MIL-PRF-38534 hermetic version available (55XX/65XX/4N55)

●Applications

●• High voltage insulation

●• Video signal isolation

●• Power transistor isolation in motor drives

●• Line receivers

●• Feedback element in switched mode power supplies

●• High speed logic ground isolation

●– TTL/TTL, TTL/CMOS, TTL/LSTTL

●• Replaces pulse transformers

●• Replaces slow phototransistor isolators

●• Analog signal ground isolation