C0603X102J5JACTU Datasheet PDF - KEMET Corporation

●The C0603X102J5JACTU from Kemet is a commercial grade surface mount multilayer ceramic chip capacitor. This capacitor incorporates a unique flexible termination system that is integrated with KEMET"s standard termination materials. A conductive silver epoxy is utilized between the base metal and nickel barrier layers of KEMET"s standard termination system in order to establish flexibility while maintaining terminal strength, solderability and electrical performance. This technology was developed in order to address the primary failure mode of MLCCs - flex cracks which are typically the result of excessive tensile and shear stresses produced during board flexure and thermal cycling. It inhibits transfer of board stress to the rigid ceramic body, therefore mitigating flex cracks which can result in low IR or short circuit failures.

● Capacitance value is 1000pF

● Capacitance tolerance is ±5%

● EIA size code is 0603 [1608 metric]

● Voltage rating is 50V

● U2J dielectric

● Low dissipation factor DF < 0.1%, low noise solution similar to C0G

● High thermal stability, high ripple current capability & low ESR, ESL

● Operating temperature range of -55°C to +125°C

● Small predictable and linear capacitance change with respect to temperature

● Flexible termination, 100% matte Sn termination finish